Tapes and Adhesives
Electron Microscopy Sciences Scotch™ Silver Tape 1/2" 72 YD
Good for making glass knife boats as well as for hanging, protecting and stripping. 3" core. 1/2" width.
Electron Microscopy Sciences Synaptek DOT Grid with 1.5 mm hole, Beryllium-Copper
Synaptek unflexible grids are made of a special Beryllium-Copper alloy and very reliable under the electron beam. Offer extreme stability for coating with support film. 4 mil thick (100um), 3.05 mm diameter. Contamination free and reusable after cleaning.
I.D.: 1.5 mm hole
Material: Beryllium-Copper
Electron Microscopy Sciences EMS Silver Conductive Adhesive 478ss Thinner 25 ML
Thinner for use with silver conductive adhesive 478ss.
Electron Microscopy Sciences Carbon Conductive Tape, Sheet Form
EMS introduces this unique double sided carbon tape which is 260 microns in thickness. The base which is Polycarbonate and 200 microns thick has on both of its sides 30 microns of conductive glue giving it a total thickness of 260 microns. The tape has one transparent liner on one side and a white thicker one on the reverse which protects the tape in shipping. These are considered to be small impurities but they may be present
Width: 65 mm
Electron Microscopy Sciences Grid-Stick Glue 5 ML
Grid-Stick, device for multi grid staining, kit replacement component.
Electron Microscopy Sciences Scotch™ 666 Tape, 3/4" 36 YD
Non-conductive transparent tape with adhesive on both sides. With white paper liner, which is slit in the center to facilitate its removal. This produces good adhesion and cleanliness. 3" core.
Electron Microscopy Sciences Kapton Low-Static, Polyimide Tape, 1/2" wide
Kapton Polyimide Tape is known for its superior ability to maintain its physical properties under harsh conditions. This general purpose film easily bonds to difficult surfaces with silicone adhesive, and leaves little to no residue when removed. Microscopists find it ideal for holding samples or masking during deposition in vacuum systems (it is relatively low outgassing). It is also perfect for positioning samples in cryo or high temperature working conditions. There are no known organic solvents for the film. ESD additive reduces static charge. Tape thickness with adhesive: 2.6 mil. No liner.
Width: ½"
Electron Microscopy Sciences XYZ-Axis Electrically Conductive Tape 9712, 1/2" wide 36 YD
Conductive Tape 9712 is an isotropically conductive pressure sensitive tape. The tape consists of a 3M adhesive loaded with conductive fibers. The result is a double-sided tape providing both good adhesion and good electrical performance with very high conductivity. The 9712 Tape is an excellent choice when needing to bond your samples for all SEM work. Based upon four wire (Kelvin probe) resistance measurements made with crossed pieces of Foil/Type 9712 or 9713/Rigid plate construction using a 1.0" x 1.0" square piece of 3M tape Type 9712 or 9713. The rigid metal surface was prepared with a Scotch-Brite pad to roughen the surface and cleaned with isopropyl alcohol. Comes pn a 3" (76 mm) core.
Width: ½"
Electron Microscopy Sciences Loctite Fixmaster Poxy Pak™ Fast Cure Epoxy
This fast cure, general purpose epoxy bonds virtually any material. It will also fill or seal cracks and rebuild worn surfaces. Comes in a 1 oz. syringe with a built-in plunger for easy dispensing without equipment. Working time is approximately 4 minutes. Includes nozzle and mixing stick. This unique adhesive may be made electrically conductive with the addition of any conductive powder (Silver, Carbon, etc.)
Electron Microscopy Sciences 3M Z-Axis Electrically Conductive Tape 9703 | Double-Sided | 6.35mm x 32.9m
3M Electrically Conductive Adhesive Transfer Tape 9703 is a pressure sensitive adhesive (PSA) transfer tape with anisotropic electrical conductivity. The PSA matrix is filled with conductive particles which allow interconnection between substrates through the adhesive thickness (the "Z-axis") but are spaced far enough apart for the product to be electrically insulating in the plane of the adhesive. The PSA tack properties and lack of any thermal curing make tape 9703 easy to use in all applications requiring a conductive tape.
Electron Microscopy Sciences Scotch™ 810 Magic Tape 72 YD
The ever popular tape that is invisible when applied. Can be written on. Resists yellowing, cracking, and moisture. Ideal for mending, slicing, and many other permanent applications. 3" core. 3" core.
Electron Microscopy Sciences Double Sides Carbon Conductive Tape, 25 mm x 5m 5 MT
EMS introduces this unique double sided carbon tape which is 260 microns in thickness. The base which is Polycarbonate and 200 microns thick has on both of its sides 30 microns of conductive glue giving it a total thickness of 260 microns. The tape has one transparent liner on one side and a white thicker one on the reverse which protects the tape in shipping. These are considered to be small impurities but they may be present
Width: 25 mm
Electron Microscopy Sciences Kapton Thin Polyimide Tape, 1/4" wide
Kapton Polyimide Tape is known for its superior ability to maintain its physical properties under harsh conditions. This general purpose film easily bonds to difficult surfaces with silicone adhesive, and leaves little to no residue when removed. Microscopists find it ideal for holding samples or masking during deposition in vacuum systems (it is relatively low outgassing). It is also perfect for positioning samples in cryo or high temperature working conditions. There are no known organic solvents for the film. Tape thickness with thinner layer of adhesive: 2.5 mil. No liner.
Width: 1/4"
Electron Microscopy Sciences Kapton Low-Static Single-Sided Thin Tape | 1/4in | 36yds
Kapton Polyimide Tape is known for its superior ability to maintain its physical properties under harsh conditions. This general purpose film easily bonds to difficult surfaces with silicone adhesive, and leaves little to no residue when removed. Microscopists find it ideal for holding samples or masking during deposition in vacuum systems (it is relatively low outgassing). It is also perfect for positioning samples in cryo or high temperature working conditions. There are no known organic solvents for the film.
Electron Microscopy Sciences Rubber Cement, 4oz with brush in cap
Excellent adhesive for all paper pasting and mountings of drawings and photographs. It is also used to adhere specimens to SEM Stubs. Any excess cured cement can be easily removed. 4 oz bottle comes with a brush in the cap.