Waste Disposal
Electron Microscopy Sciences Biohazard Waste Box, Intermediate, 12" x 12" x 20", 7" Opening
These boxes are used for the disposal and incineration of biohazardous waste. The outer box is made from corrugated cardboard; the inner one is a 2-mil polypropylene bag. When the box is full, the safety cap is pulled into place and the entire unit is ready for incineration.
Dimensions: 12" x 12" x 20"
Size: 7" Opening
Electron Microscopy Sciences Glass Disposable Box, Floor
These boxes are used to dispose of empty ampoules, broken glass, empty vials, biohazard wastes, etc. The outer box is made from corrugated cardboard; the inner one is a 2-mil polypropylene bag. When the box is full, the safety cap is pulled into place and the entire unit is ready for disposal or incineration. There are no replacement bags for these boxes. Measures:12"(L) x 12"(W) x 27(H)" opens: 7"
Electron Microscopy Sciences XYZ-Axis Electrically Conductive Tape 9712, 1" wide 36 YD
Conductive Tape 9712 is an isotropically conductive pressure sensitive tape. The tape consists of a 3M adhesive loaded with conductive fibers. The result is a double-sided tape providing both good adhesion and good electrical performance with very high conductivity. The 9712 Tape is an excellent choice when needing to bond your samples for all SEM work. Based upon four wire (Kelvin probe) resistance measurements made with crossed pieces of Foil/Type 9712 or 9713/Rigid plate construction using a 1.0" x 1.0" square piece of 3M tape Type 9712 or 9713. The rigid metal surface was prepared with a Scotch-Brite pad to roughen the surface and cleaned with isopropyl alcohol. Comes pn a 3" (76 mm) core.
Width: 1"
Electron Microscopy Sciences Gel-Pak Conductive Hinged Box, 3½" x 4½" x ½"
Gel-Box AD Series Carriers owe their unique device-holding capabilities to a proprietary GEL coating applied directly to the bottom of a hinged box. Devices are held once contact is made with the GEL surface and will stay in place, even if the carrier is tilted or jarred. The carriers are designed for manual off-loading with tweezers or by hand. GEL-PAK AD series are ideal for handling devices where no direct contact with the top of the device is important.
The GEL-BOX Carriers may also be used for bare die handling, such as GaAs, PETs, laser diodes, and beam-lead devices where the die size is small (less than 1 mm) and tweezers or other specialized techniques are used for off-handling.
We offer standard retention level X4.
Dimensions: 3½" x 4½" x ½"
Electron Microscopy Sciences 50 medium bags for Lab-sorb
Extra durable bags (1L) for use with Lab-Sorb granules to clean up spills.
Electron Microscopy Sciences 50 Small bags for Lab-sorb
Extra durable bags (500-600ml) for use with the Lab-Sorb granules to clean up spills.
Electron Microscopy Sciences Glass Disposable Box, Bench Top
These boxes are used to dispose of empty ampoules, broken glass, empty vials, biohazard wastes, etc. The outer box is made from corrugated cardboard; the inner one is a 2-mil polypropylene bag. When the box is full, the safety cap is pulled into place and the entire unit is ready for disposal or incineration. There are no replacement bags for these boxes. Measures: 8"(L) x 8"(W )x 10"(H), opens: 5"
Electron Microscopy Sciences Glass Disposable Box, Intermediate
These boxes are used to dispose of empty ampoules, broken glass, empty vials, biohazard wastes, etc. The outer box is made from corrugated cardboard; the inner one is a 2-mil polypropylene bag. When the box is full, the safety cap is pulled into place and the entire unit is ready for disposal or incineration. There are no replacement bags for these boxes. Meaures:12"(L) x 12"(W) x 20"(H), opens: 7"