HPLC Guard Columns and Cartridges
NANOMICRO TECHNOLOGIES INC NanoChrom Technologies, BioCore SEC-150 LC Analytical Column, 1.8 m, 4.6300 mm, Stainless Steel
BioCore SEC is a family of high performance, size exclusion chromatography columns designed for separating a broad range of biomolecules based on size. This column technology involves the creation of a neutral hydrophilic layer on the surface of specially designed, high-strength, monodispersed silica particles, combined with well-established column packing processes. BioCore SEC-150 columns are suited for aggregate determination of peptides, small proteins and related substances.
NANOMICRO TECHNOLOGIES INC NanoChrom Technologies, BioCore SEC-120 LC Analytical Column, 1.8 m, 4.6300 mm, Stainless Steel
BioCore SEC is a family of high performance, size exclusion chromatography columns designed for separating a broad range of biomolecules based on size. This column technology involves the creation of a neutral hydrophilic layer on the surface of specially designed, high-strength, monodispersed silica particles, combined with well-established column packing processes. BioCore SEC-120 columns are suited for aggregate determination of peptides, small proteins and related substances.
Microsolv Technology Corporation Guard Column Cartridges, RP C18, 5um, 100A. 2.1mm ID x 10mm Length. 5/PK.
These Guard Column Cartridges are packed with 5µm, Cogent RP C18™ Stationary Phase. They are double end capped ( fully ), with traditional bonding of an 18 carbon silane to the highest purity silica available. Designed to protect your 2.1mm ID, RP C18, Analytical Columns from particulate and contaminants that will adsorb to it. They are packed in Stainless Steel Tubes and have Stainless Steel Frits that are pressed into PEEK Frit Caps. These Guard Column Cartridges must be used with a Guard Column Holder.
Microsolv Technology Corporation Guard Column Cartridges, RP C18 ABX, 3um, 100A. 2.1mm ID x 10mm Length. 5/PK.
These Guard Column Cartridges are packed with 3µm, Cogent RP C18 ABX™ Stationary Phase. They are specially end capped ( bulky ), with traditional bonding of an 18 carbon ligand to the highest purity silica available.Designed to protect your 2.1mm ID, RP C18 ABX, Analytical Columns from particulate and contaminants that will adsorb to it. They are packed in Stainless Steel Tubes and have Stainless Steel Frits that are pressed into PEEK Frit Caps. These Guard Column Cartridges must be used with a Guard Column Holder.
Microsolv Technology Corporation Guard Column Cartridges, RP C18, 5um, 100A. 4.0mm ID x 10mm Length. 5/PK.
These Guard Column Cartridges are packed with 5µm, Cogent RP C18™ Stationary Phase. They are double end capped ( fully ), with traditional bonding of an 18 carbon silane to the highest purity silica available. Designed to protect your 3.0, 4.0 or 4.6mm ID, RP C18, Analytical Columns from particulate and contaminants that will adsorb to it. They are packed in Stainless Steel Tubes and have Stainless Steel Frits that are pressed into PEEK Frit Caps. These Guard Column Cartridges must be used with a Guard Column Holder.
Microsolv Technology Corporation Guard Column Cartridges, RP C18 ABX, 5um, 100A. 4.0mm ID x 10mm Length. 5/PK.
These Guard Column Cartridges are packed with 5µm, Cogent RP C18 ABX™ Stationary Phase. They are specially end capped ( bulky ), with traditional bonding of an 18 carbon ligand to the highest purity silica available.Designed to protect your 3.0, 4.0 or 4.6mm ID, RP C18 ABX, Analytical Columns from particulate and contaminants that will adsorb to it. They are packed in Stainless Steel Tubes and have Stainless Steel Frits that are pressed into PEEK Frit Caps. These Guard Column Cartridges must be used with a Guard Column Holder.
Microsolv Technology Corporation Guard Column Cartridges, RP C18 PE,3um, 100A. 2.1mm ID x 10mm Length. 5/PK.
These Guard Column Cartridges are packed with 3µm, Cogent RP C18 PE™ Stationary Phase. Double end capped (fully), it is bonded with an 18 carbon aliphatic hydrocarbon, with an Amide group embedded in the middle of the ligand, using the highest purity silica available.Designed to protect your 2.1mm ID, RP C18 PE, Analytical Columns from particulate and contaminants that will adsorb to it. They are packed in Stainless Steel Tubes and have Stainless Steel Frits that are pressed into PEEK Frit Caps. These Guard Column Cartridges must be used with a Guard Column Holder.
Microsolv Technology Corporation Guard Column Cartridge, PEEK, 3.0mm ID, 8mm active length. Frits sold separately. 1 EA.
This Guard Column Cartridge (tube) is 3.0mm ID. Extruded from Victrex PEEK, no chemical treatment is done and the interior mirror like finish is provided through our very careful extrusion techniques. Frits are sold separately.
Microsolv Technology Corporation Guard Column Cartridges, RP C18 ABX, 10um, 100A. 4.0mm ID x 10mm Length. 5/PK.
These Guard Column Cartridges are packed with 10µm, Cogent RP C18 ABX™ Stationary Phase. They are specially end capped ( bulky ), with traditional bonding of an 18 carbon ligand to the highest purity silica available.Designed to protect your 3.0, 4.0 or 4.6mm ID, RP C18 ABX, Analytical Columns from particulate and contaminants that will adsorb to it. They are packed in Stainless Steel Tubes and have Stainless Steel Frits that are pressed into PEEK Frit Caps. These Guard Column Cartridges must be used with a Guard Column Holder.
Microsolv Technology Corporation Guard Column Cartridges, RP C18 PE,10um, 100A. 4.0mm ID x 10mm Length. 5/PK.
These Guard Column Cartridges are packed with 10µm, Cogent RP C18 PE™ Stationary Phase. They are double end capped ( fully ), with traditional bonding of an 18 carbon silane to the highest purity silica available.Designed to protect your 3.0, 4.0 or 4.6mm ID, RP C18 PE, Analytical Columns from particulate and contaminants that will adsorb to it. They are packed in Stainless Steel Tubes and have Stainless Steel Frits that are pressed into PEEK Frit Caps. These Guard Column Cartridges must be used with a Guard Column Holder.